IMAGEN DE REFERENCIA

  • Sobre pedido

61M6P080A0145 CILINDRO PASANTE D.E. MAG. AMORT.

0 Reseñas(s)
61M6P080A0145

CILINDRO PASANTE D.E. MAG. AMORT.

61M6P080A0145

Cylinders Series 61 - through-rod

Envio

¿Necesitas certificado de calibración?, ¡pregunta a tu vendedor favorito vía WhatsApp!

CAMOZZI
Cotizar
Series general data

Type of construction with tie-rods (inside the profile)
Operation double-acting, single-acting, tandem. Low friction version: double-acting only.
Materials standard: AL end-blocks and piston, rolled stainless steel AISI 420B rod, anodized AL profile tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals; low friction: standard materials with NBR piston seal and NBR rod seal (FKM rod seal on request) low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring, stainless steel AISI 303 nuts, stainless steel AISI 420B tie-rods, PU piston seals and NBR rod seal
Type of mounting with front / rear flange, foot mounting, with front / rear / centre / swivel trunnion
Stroke min - max 10 ÷ 2500 mm
Operating temperature standard and low friction: 0°C ÷ 80°C (with dry air -20°C) low temperature (-40°C version): -40°C ÷ 60°C (with dry air -40°C) low temperature (-50°C version): -50°C ÷ 60°C (with dry air -50°C)
Operating pressure 1 ÷ 10 bar (standard and low temperature); 0,1 ÷ 10 bar (low friction)
Speed 10 ÷ 1000 mm/sec, no load (standard and low temperature); 5 ÷ 1000 mm/sec, no load (low friction)
Fluid filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Este producto no tiene reseñas!
Escribe tu reseña

También podría gustarle!

De las mejores marcas

Envíanos un WhatsApp

Ventas

Ventas

Ing. Ricardo

Disponible 09:00 - 20:00

ve1@jinsa.com.mx

Tel. Oficina: 6188140846

Contacto vía:

  • TelegramTelegram